Makita BHP451 LXT 18-Volt Lithium-Ion Hammer Driver-Drill
Features:
- LXT Lithium-Ion battery and optimum charging system produces 280% more lifetime work with 2x more cycles.
- 3-speed design produces 25% faster working speed with more efficiency in a wider range of applications
- Shift Lock Driver System quickly shifts from "hammer drill" to "driver" mode with one touch
- Egonomic shape fits like a glove with even pressure and easy control
- Compact design at only 9-7/8" length and weighs only 4.9 lbs for less operator fatigue
Buy it now at Amazon!
Description:18V, Lithium-Ion Cordless Hammer Driver Drill Kit, All Metal 2 Speed Transmission, 1/2" Metal Single Sleeve Ratcheting Chuck, 2 Built In LED Lights, Makita Built 4 Pole Motor Design, Compact Design, 9-3/8" Long & Weighs Only 4.8 LB, Shift Lock Drive System.
Related Products
Related Categories
Top-Ranked Products in Related Categories
User Reviews
All 1 reviews shown
not happy with drill
I owned this 18 volt makita 5 month and took the first one back the chuck failed it would not tighten or loosen so home Depot gave me a new one and then a month later that chuck did the same thing so i bought new chuck for it and then the 3rd and 2nd gear will not stay in gear tryed to take it back and they will not do anything with it. As far as i am conserned i will not own anther on of these junk drills its not even a year old. Buyer be ware i would look at craftsman or dewalt ridged they have a life time service agreement i will probly buy a riged next. I might have got a lemon but two chuck dont buy
External User Reviews:
All 7 reviews shown
Not perfect, merits only 4 to 4.5 stars due to large runout of Jacobs chuck
This is merely a first impression and as I use more of this tool, I will update my comments. I am not a pro contractor, but only a weekend handyman warrior type who appreciates good tools. I opted to buy Makita instead of the Milwaukee V28 entirely because of Makita's lighter weight. To me ergonomics means almost as much as tool power. Also I've never had any complaints or durability issues with any of my Makita tools and so felt comfortable buying Makita again.
I bought this drill with Makita's free impact driver offer when the lithium line was first introduced. The case for the drill can accommodate Makita's lithium impact driver side by side with the drill. The same is not true with the smaller impact driver case. At the time I ordered mine, they cost roughtly same, $329 for the drill and $319 for the impact driver. I think the price differential has since increased with the impact driver now only at $279. With the free tool offer and the $75 off promo offer from Amazon at the time, I paid only around $254 for both tools.
Onward to the tool itself. I will structure this review by comparing the Makita drill with my Bosch 18V Brute Tough hammerdrill, model 13618, that I've been using the last couple of years. This Makita 18 lithium hammerdrill is definitely much lighter than the Bosch 18V hammerdrill. Whether the Makita can survive a 2-story drop on concrete as can the Bosch Brute Tough is another matter. The Makita has three speed ranges. The slowest speed range (0-300 rpm) is useful on large spade bits, metal drilling, or hole saws, etc where extra control and extra torque are needed. I tested my Bosch side by side against the Makita using a 3" hole saw on redwood. The Bosch's low range is 0-600 rpm. In the 0-600 rpm range both the Bosch and the Makita were about equal in performance. At 300 rpm, the Makita did not show any advantage compared to drilling at 600 rpm with this particular test. As for torque, the Makita has 560 in-lbs; the Bosch has 475 in-lbs. The supposed extra power of the Makita did not manifest itself during this 3" hole saw test. Perhaps other more demanding tests, such as drilling large holes in metal, might bring out the advantage.
One way I judge a drill driver is how gentle it is in driving delicate screws. Unfortunately, in screw driving mode, this drill has so much torque even at the lowest setting that it will easily strip delicate screws long before the clutch kicks in. I have a feeling this problem is common among the powerful 18v drills.
The auxilliary handle on the Makita works really well, but the metal band mars the finish on the drill body. It kind of hurts to see the drill scratched up the very first day by the aux. handle. It does grip tightly and stays put, unlike the lousy one on the Bosch.
I like the Bosch chuck much better because the carbide teeth on the Bosch's jaws have a better bite and less chance of slipping than the steel teeth on Makita's Jacobs chuck. The Makita Jacobs chuck also has a tendency to unwind and self-loosen its grip on a bit during heavy drilling, something that has never happened on my Bosch drill.
A major shortcoming with the Makita's Jacobs chuck is the large amount of runout it has. Runout is a measure of eccentricity. When I have time I will measure the runout precisely using a dial indicator, but for now I will state that the Makita's Jacobs chuck on this model has roughly twice the runout as that found on my Bosch's chuck. The effect of this large runout is a very pronouced gyration of the drill body when drilling at low to medium speeds, such as when drilling metal or drilling with a hole saw or spade bit. The large gyration is a safety hazard as it can cause the operator to lose balance while standing high on a ladder, for example. It can sometimes be corrected by rechucking the bit after rotating the bit 90 to 180 degrees relative to the chuck. Sometimes this fix works, but sometimes not. I checked this runout on another brand-new Makita lithium hammerdrill and the result was identical. This is a troubling.
The slider switch that lets me instantly switch between drill or driver or hammerdrill mode on the Makita is a plus, but in my opinion is not a big deal. I guess I've gotten too used to turning the clutch/mode setting ring on these cordless drills by now.
The Makita has a built-in LED light. Makita placed the fixed-angle light just above the trigger switch as a one-size-fits-all approach to accommodate all lengths of bits. The drawback is the placement entirely favors long bits at the expense of short and medium length bits because short bits will be hit by a large dark shadow cast by the big chuck. For driving screws and drilling with a short bit, the exact point where you want light is the exact point where the large dark shadow falls! The ideal LED light should be placed lower near where the battery is and have an adjustable angle to accommodate different length bits.
One thing no lithium-ion power tool maker would like the potential customer to know is that rechargeable lithium-ion batteries permanently lose capacity over time as a function of storage temperature and the state-of-charge. For example at room temperature(25 degrees C), a fully charged (100%) Li-on battery permanantely loses 20% of its rechargeable capacity in just one year. At higher temperatures, the loss is even greater. Please don't misinterpret the above as to mean that you have to leave your tool and battery unused for a whole year for it to suffer from capacity loss. The capacity loss occurs at different rates at the different temperatures and states-of-charge but it's all cumulative, and the deteriotion occurs even when the tool is constantly being used, as well as during short-term storage, and not just during long-term storage. If you have a spare Li-on battery that you don't constantly use, the best way to store it is at a 40% charge. At 40% charge at 25 deg. Celsius, it loses only 4% capacity after one year. At 40% at 40 deg Celsius, it loses 15%. Heat is detrimental, even at a mere 40-degree Celsius. Yes, I said a "mere" 40-degrees, which is "merely" 104 degrees Fahrenheit. Most pros WILL have frequent, perhaps daily, occasions to leave their tools in the trunk or cabin of their truck, where it will easily exceed 104 deg. Fahrenheit in a hurry. Makita is giving these lithium batteries only a 1-year warranty for very good reasons. (Note: The above comments about capacity loss apply only to rechargeable lithium-ion batteries with a manganese oxide cathode. This applies to Milwaukee's V28 line, and I have every reason to think it applies to Makita's current Li-on and Bosch's upcoming Li-on batteries as well. I am not sure whether it applies to DeWalt's new lithium batteries which use an aluminum anode coated with nano-particles). The above comments on rechargeable Li-on batteries I learned from reading technical postings and articles on the WEB.
Overall the biggest advantage of the Makita lithium over the Bosch NiCD is really just the lighter weight, and also perhaps the 25% longer battery life (i.e. 3 Ah vs. 2.4 Ah) and a much flatter discharge curve than those of NiCD and NiMH. The Makita is lighter, noticeably lighter when you first pick up the tool, but in actual use when comparing it to the Bosch, the Bosch's greater weight seemed to disappear over time. The Makita feels better in the hand. If you are already happy with your other 18V NiCD or NiMH drill, switching to lithium likely won't give you much better satisfaction. This tool and the lithium technology is a slight improvement over the 18v NiCD or NIMH versions, but it's not a quantum leap in improvement overall, in my humble opinion.
I previously gave this drill 5 stars, but now with the large runout that I noticed, I am more inclined to give it 4 to 4.5 stars instead, but Amazon's software doesn't permit me to update the stars rating.
So far everything has worked great.
I have used it around the house and on small projects and still using the same battery. I used it to mix some mortar in a 3 gallon bucket without any problems. It has great power and a long lasting battery compared to most other cordless drills I have used. It is definitely heavy to carry around for bigger jobs and although I appreciate the attempt of giving me a light I wish they would have adjusted it to point on the tip instead of around it, it actually makes it a little more difficult to see the screw head or hole in low light situations.
great tools lxt 18 volt.
we run a gutter installs all day with this light weight tool ti runs great. scott
Great Drill
Purchased this drill last fall before beginning to replace the aluminum wiring in my 40 year old home. It replace a 15 year old (approx.) 9.6 volt Makita which still worked fine; but it needed new batteries. It seemed a good time to trade up.
The new drill is about 1 pound heavier than my previous drill. Considering that I've moved from 9.6 to 18 volts and added a hammer function this seems to be a quite reasonable tradeoff. While noticeably heavier the new drill seems better balanced than the old drill (stick battery in the handle). I didn't find it tiring to use.
In the past several months I have done a lot of heavy drilling and also drove a lot of dry-wall screws. The drill has all the power I needed to make short work of up to 1" holes often through multiple 2x4's. Since I often moved between drilling and driving screws I liked the ability to make that change quickly without changing the clutch setting.
Someone else commented on chuck run-out and holding power. I didn't experience either of these problems. However, most of my drilling was done with a set of old Craftsman spade bits that had terrible run-out as purchased. My father was a machinist at the time I purchased the bits and re-ground the forged drill flats true to the axis of the bit solving this problem. It also gives me bits that I know run true as a fair test of a chuck. There are a lot of bad bits out there.
My biggest disappointment was the case. The case my drill arrived in was designed to hold both the drill and an impact wrench. It is huge. Since I didn't purchase the impact wrench about 40-50% of the space is wasted. I did buy the Makita 18v flash light. It doesn't seem like it would have taken much creativity to design a case that would hold the drill and either the impact wrench or the light. (Listening out there Makita??) The only other complaint is the lack of adjustability of the light. I did a fair amount of work in dark (overhead) spaces. The light is fine when using the (longer) spade bits. But when I was driving screws with a short Phillips bit the light was no help at all.
Overall this is a great drill and I look forward to using it for a long time.
I love it!
I needed a new drill for a couple of big home renovation projects and bought this based on the review in fine homebuilding. I was also attracted to the fact that lithium-ion batteries are a lot less toxic to manufacture and dispose of. the drill has been fantastic-- even better than i hoped. great power, balance, ease of use, and battery life.
The Bonber
Great tool , couldn't ask for any better. Maybe a tad on the heavy side , but I love it.
my first drill, and what a power house it is
This is the first personal drill that I have purchased. I did a lot of research online and scruitinized the different brands and finally settled on this one. I went to home depot to get a good feel and look up close on some of what they offered. Thats when i spotted this baby. I have personally used my father's dewalt 14.4V xrp series drill/driver and got a chance to drill and drive screws with the milwaukee v28 drill. I have read reviews on all the major cordless power hitters including hitachi, panasonic, hilti, milwaukee, bosch, makita, and dewalt.
I was even thinking of buying the 18V makita 8444 mxt nimh power drill because it's spec torque was also 560 inch pounds. This drill looks great and i hope it won't let me down. I have registered it and expect NOT to have to use the 3 year warranty it comes with. It's made in japan so I'm hopeful the quality and durability is just as good as on a honda or toyota. It has arm twisting power in low gear and if you try to hold the chuck still while depressing the trigger you'll burn your skin trying to do so. I did like a dumbass trying to see if i could stop the drill's torque. i hope this helps whomever is looking into buying this drill.
Permalink
|
|
